The specialized F series tractors are designed to work in orchards. These machines have compact overall dimensions, a small turning radius and high-grade equipment, offering a high level of comfort and reliability. They are essential for garden cultivation based on both classical and intensive technologies.
A seat with fabric upholstery and a mechanical suspension.
A rear window wiper.
An air-conditioning system.
Panoramic windows.
A hinged front windshield.
Good noise insulation (noise level in the cabin does not exceed 83 dB).
PREMIUM-LEVEL COMFORT
CONTROL SYSTEMS
STEERING. The steering column is installed at the optimal angle. A digital dashboard similar to that of a car is informative and easily readable.
THE CONTROL MODULE. The F series tractor is equipped with a module for mechanical control of hydraulic valves. The linear, ergonomic arrangement of the controls makes it easier for the operator to access them at arm's length. The hitch control system is located alongside the operator’s seat.
INFORMATIVE DASHBOARD. The dashboard has a built-in onboard computer.
THE REVERSE CONTROL MODULE. The F-series tractor is equipped with a mechanical reverse, which is controlled by a steering-column shift.
THE REVERSE CONTROL MODULE. An electronically controlled reverse mechanism is available as an option.
THE PEDAL ASSEMBLY.The combined pedal layout provides enough space for the operator's feet to be conveniently positioned.
A WELL-EQUIPPED CABIN
The base configuration of the F series tractor includes halogen work lights.
LED lights are available as an option.
There is a 7-pin electrical connector for working with trailer machines.
PERKINS ENGINE
All F series tractors are equipped with 4-cylinder Perkins engines.
The engine has a volume of 4.4 liters and produces 393 Nm of torque at 1400 rpm.
The engine power output is 93 hp.
The torque backup equals 32%.
The engine is equipped with a turbocharger, an air cooler (Intercooler), a Power Core air purification system with forced dust removal, and an 85 A generator.
The fuel system is outfitted with two tanks, a 60-liter and a 35-liter one.
SYNCHRO SHUTTLE TRANSMISSION
The basic configuration of an F series tractor includes a mechanical synchronized transmission with a dry clutch disc that is 12 inches in diameter.
A RELIABLE MECHANICAL TRANSMISSION
The transmission is outfitted with a creeper gear and provides 16 forward and 16 reverse speeds.
The maximum transmission speed is limited to 40 km/h. With a creeper gear installed, the minimum speed begins at 310 m/h.
The transmission is controlled by the gear shift (1) and the driving mode selection (2) levers.
HI-LOW TRANSMISSION
As an option, an F series tractor can be retrofitted with a transmission that has a multi-disc "wet" clutch and electronic gear shift control.
ELECTRONICALLY CONTROLLED ALL-WHEEL DRIVE
The rear axle has a positive locking differential with electrohydraulic control and can withstand a load of 3300 kg.
The front axle of an F series tractor in its base configuration has a self-locking differential and can withstand a load of 2150 kg.
All-wheel drive engagement control is electro-hydraulic.
COMPACT CHASSIS
— Front axle wheel turning angle equals 55 degrees. — The basic configuration includes removable swivel front wings. — The chassis allows for the installation of rear wheels with a rim diameter of R28. — The rear axle is equipped with disc brakes.
HIGH-PERFORMING HYDRAULICS
The hydraulic pump capacity is 60 l/min.
The F series tractor uses a dual-circuit hydraulic system with piston pumps.
The steering system’s hydraulic pump capacity is 30 l/min.
The basic tractor configuration includes 3 pairs of distribution valves. A valve pair acting as a hydraulic motor can be installed.
2ND CATEGORY REAR HITCH
The McCormick series F tractor is equipped with a 2nd category rear hitch with hydraulic cylinders that provide a load capacity of 2700 kg. As an option, retrofitting the tractor with more powerful cylinders that offer a load capacity of 3400 kg is possible.
Lower levers are equipped with quick-release hinges.
To work with trailed machines, the tractor is equipped with a reach-adjustable traction bar that can withstand a vertical load of 2000 kg.
A PTO SHAFT WITH A MECHANICAL DRIVER
As an option, a 2-speed PTO shaft operating at 540 and 1000 rpm is available.
The F-series tractor in its base configuration is equipped with a rear power take-off shaft mechanism capable of operation in three modes (540, 540 ECO and synchronous mode) and with a mechanical drive.
The PTO uses removable shanks: — a shaft with a diameter of 1’ 3/8” by 21 slots; — a shaft with a diameter of 1’ 3/8” by 6 slots.
MAIN FEATURES
Wheelbase
Total tractor length with front ballast
Tractor weight without ballast loads
Max. permissible tractor weight
2 124 mm
4 242 mm
3 000 kg
5 250 kg
Max. tractor width
Min. tractor width
Min. tractor height
Max. tractor height
1 830 mm
1 296 mm
2 272 mm
2 422 mm
1 440 mm on the rear tires 14.9 R28 (380/85R28)
SIGN UP FOR A TEST DRIVE
Leave your contact details and one of our employees will get in touch with you within one business day.
You can get detailed information about the test drive from one of our regional managers.